Harvest season often means putting in long hours, which can make it difficult to stay alert and on the lookout for potential hazards. Perennial and Safe Electricity provide safety tips to help farmers make this harvest season a safe one.
Be prepared for potential emergencies during the rush of the harvest season. Be sure that you can see well in the work areas.
Consider adding extra lighting around grain bins
Take the time to look up and look out for electrical lines. Always be aware of where they are in relation to your equipment. Keep a minimum of 10 feet away from all electrical equipment, and lower extensions before moving equipment. If you see a power line that is sagging or low, contact Perennial. Also, keep an eye out for guy wires. While these wires are not energized, they can bring down energized power lines.
In equipment with auto-guidance systems, less focus is needed on steering, which may lead some drivers to think that they do not need to be as aware of navigation issues. Yet, even while using a GPS with auto-steering, farm workers need to keep safety in mind and stay focused on their surroundings. Recognize when you need to take breaks so that you can be active and engaged in the farm work.
Additional electrical safety tips include:
• Use a spotter when operating large machinery near power lines.
• Inspect the height of farm equipment to determine clearance.
• Look up and use care when moving any equipment such as extending augers or raising the bed of grain trucks around power lines.
• Always set extensions to the lowest setting when moving loads to prevent contact with overhead lines. Grain augers should always be positioned horizontally before being moved.
• Never attempt to move a power line out of the way or raise it for clearance.
• If the machinery you are operating does make contact with a power line, stay on the equipment. Immediately call 911, warn others to stay away, and wait for Perennial’s crew to cut the power.
• Only on the rare occasion that the machinery catches fire should you leave the vehicle after contact is made. If this is the case, jump off the equipment with your feet together and without touching the ground and machinery at the same time. Then, still keeping your feet together, hop to safety as you leave the area. Never touch anything that is in contact with
a power line.
For more information on electrical safety, visit SafeElectricity.org.